MERCURY Line Interactive UPS (2000VA) – Elite 2000 Pro
Roll over image to zoom in
₵ 2,700.00
- Wide input voltage range
- Compatible with generators
- Overload protection
- Short circuit protection
- Built-in AVR
- Battery deep discharge protection & overcharge protection
- Rating input voltage: 2000 VA / 1200 W
- Rating input frequency: 60/50Hz (auto sensing)
- Input phase: Single phase
- Input socket: With Fuse
- Cold Start (0 to 100% load): Press the ON/OFF Switch
- Input Range (220V): 140-300
- Rating output (VA): 2000
- Rating output (W): 1200
- Power factor: 0.6
- Rating output voltage (V): 220
- Waveform: Battery mode (simulated sine wave), AC mode (sine wave)
- AC Voltage Regulation: ±10% (Battery mode)
- Rear output socket: 4 x Universal – Battery backup
- Waveform: Simulated Sine Wave (Battery mode)
- Line Mode: Synchronize with the utility
- Rating frequency: 60Hz or 50 Hz ± 1 Hz
- Battery Mode: Yellow flashing
- Short circuit protection Line Mode: Fuse & Firmware protection
- Short circuit protection Battery Mode: Firmware Protection
- Overload protection Line Mode: 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.
- Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately
- Indicators AC mode: Green Lighting
- Indicators Battery Mode: Yellow Flashing
- Indicators Fault: Red Lighting
- Alarm Battery Mode: Sounding every 10 Seconds
- Alarm Low Battery: Sounding every Second
- Alarm Overload: Sounding every 0.5 second
- Alarm Fault: Continuously sounding
- Full Protection: Overload, discharge, and Overcharge protection
- Transfer Time: Typical 2-6ms, 10ms max.
- Transfer Time: Typical 2-6ms, 10ms max.
- Communication Interface: Optional RS232/RJ11
- Battery and runtime rating: 2 X 12V/9AH
- Recharge time – Typical: 6-8 hours recover to 90% capacity
- Charge current: About 1A at normal mode
No more offers for this product!
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.