MERCURY UPS (1000VA) – Elite 1000 Pro

Output Short Circuit Protection

·         Intelligent Battery Management

·         Over Temperature Protection

·         Wide Range Of Input Voltage

·         Overload Protection

·         Auto Restart

·         Dataline Protection

·         Surge Protection

·         DC Start

·         Input Voltage: 220VAC

·         Input Frequency: 50Hz

·         Input Phase: Single Phase

·         Input Socket with FUSE

·         Cold Start (0~100% load): Press the ON / OFF Switch

·         Input Range (220V): 140V~285V

·         Normal Frequency: 50Hz

·         Rating Output (VA): 1000VA

·         Rating Output (W): 600W

·         Waveform: Battery Mode (Simulated Sine Wave), AC Mode (Sine Wave)

·         Power Factor: 0.6

·         Rating Voltage: 220V

·         Output Range: 220VAC +17~22% (No Load Connected)

·         Rear Output Socket: 3x IEC – Battery Backup

·         Transfer Time: Typical 8ms (max 15ms)

·         Short Circuit Protection Line Mode: FUSE & Software Protection

100%~120% (gives alarm & shut down in 3min)

120%~130% (beeps alarm & shut down in 30s)

>130% (shut down immediately)

·         Battery Mode: Software Protection controlled by CPU

100%~110% (gives alarm & shut down in 10s)

>110% (shut down immediately)

·         Battery & Runtime Rating: 12V / 9AH x1

·         Battery & Runtime Backup Time: Typical 8mins~20mins

·         Battery & Runtime Change Current: 1.5A (max)

·         Battery & Runtime Over Charge: >14.8V ±0.5 (Stop Charging)

·         Battery & Runtime Protection: <13.5V ±0.5 (Recharge)

·         Output Rating Frequency: 50Hz

·         Output Battery Mode: 50Hz ±1Hz