VA Compressor (166xl)
Roll over image to zoom in
₵ 1,000.00
Specifications
| Input Connectors | 1/4″ TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot |
| Input Impedance | 40k |
| Max Input | +24dBu, Balanced or Unabalanced (Absolute) |
| CMRR | >45dB (any Frequency) |
| Detector Input | Connector: 14″ TRS phone, Floating Balanced |
| Detector Input Impedance | >200k |
| Detector Input Max Level | +28dBu, Balanced or Unbalanced |
| Output Connectors | 1/4″ TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot |
| Output Impedance | Balanced 200 ohm, unbalanced 100 ohm |
| Max Output | (Balanced): +24dBm; <0.3% THD; (Unbalanced): +20dBm; <0.3% THD |
| Noise | <-90dBu, Unweighted (20Hz – 20kHz) |
| Frequency Response | 20Hz -20kHz, +0, -0.5dB; +0, -3dB 0.5Hz and 90kHz. |
| THD | <0.2%, Typical, any amount of compression up to 40dB @ 1kHz |
| Compressor Threshold Range | -40dBu to +20dBu |
| Compressor Threshold Characteristic | OverEasy® or hard knee |
| Compressor Ratio | Variable 1:1 to :1 thru to -1:1; >60dB maximum compression |
| Compressor Attack Time | Program dependent; typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB |
| Compressor Release Time | Program Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/sec rate |
| Dynamic Range | >113dB |
| Gain Adjustment Range | Variable from -20dB to +20dB |
| Stereo Coupling | True RMS Power summing |
| Summing | 1/4″ TRS phone jack |
| Operating Voltage | DO: 90-130VAC, 50/60Hz; EU: 200-250VAC, 50/60Hz |
| Power Connector | IEC receptacle |
| Dimensions | 1.75″ x 19″ x 6.5″ (4.45cm x 48.2cm x 16.51cm) |
| Unit Weight | 4.452 lbs (1.99 kg) |
| Shipping Weight | 6.62 lbs (2.99 kg) |
No more offers for this product!
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.